Sản Phẩm chi tiết
Chống sét lan truyền Hakel PIIIM-275 DS/1+1
- Giá : Liên Hệ
- Lượt xem : 2152
-
Mô tả :
Chống sét lan truyền cho hệ thống điện nguồn Hakel PIIIM-275 DS/1+1 do Czech sản xuất, công ty Điện tử viễn thông sài gòn lắp ráp với model ET-PIIIM được sử dụng rất phổ biến, và đem lại hiệu quả cao cho chủ đầu tư.
PIIIM-275 DS/1+1 Vseries is a two-pole, metal oxid varistor surge arrester combined with gas discharge tube, Type 2 according to EN 61643-11 and IEC 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of the switching overvoltage, which is generated in power supply systems entering the building. The main use of PIIIM-275/1+1 Vseries arrester is in all kinds of industry,residential and administration buildings. They are to be placed into the subsidiary switchboards or control boxes.
The marking M specifies a type of construction with removable module. The marking of DS specifies a version with remote monitoring.
Test class according to EN 61643-11 ed. 2 and IEC 61643-11 | TYP 2, CLASS II | |
Network type | TT TN-S |
|
Maximum continuous operating voltage | UC | 275 V AC / 350 V DC |
Maximum discharge current | Imax | 50 kA |
Nominal discharge current for class II test (8/20) | In | 20 kA |
Total discharge current (8/20 µs) L+N->PE | Itotal | 50 kA |
Voltage protection level | Up | < 1,3 kV |
Impulse discharge current for class I test (10/350) N/PE | Iimp | 20 kA |
Temporary overvoltage (TOV) L/N | UT | 335 V/5 s |
Temporary overvoltage (TOV) N/PE | UT | 1200 V/0,2 s |
Response time L/N | tA | < 25 ns |
Response time N/PE | tA | < 100 ns |
Max. back-up fuse | 160 A gL/gG | |
Short-circuit withstand capability | Ip | 60 kArms |
LPZ | 1-2 | |
Housing material | Polyamid PA6, UL94 V-0 | |
Degree of protection of enclosure | IP20 | |
Operating temperature | ϑ | -40°C ... +80 °C |
Cross-section of the connected conductors (at tightening moment of clamps 3 Nm) | 25 mm2 (solid) 16 mm2 (wire) |
|
Method of assembly | DIN rail 35 mm | |
Failure signalisation (S) | green - ok / red - failure | |
Potential free signal contact (DS) (recommended cross-section of remote monitoring max.1 mm2) | AC: 250 V / 0,5 A, DC: 250 V / 0,1 A | |
Lifetime | min. 100 000 h | |
Weight | m | 166 g |
Article number | 27 015 |
Thiết bị chống sét lan truyền 1 pha cho nguồn điện
- Model : PIIIM-275 DS/1+1
- Thương hiệu : Hakel
- Nước sx : Czech
+ Kiểm nghiệm đạt tiêu chuẩn : EN 61643-11 ed. 2 and IEC 61643-11 : TYP 2, CLASS II
+ Dạng kết nối : TT , TN-S
+ Điện áp tối đa hoạt động liên tục (UC) : 275 V AC / 350 V DC
+ Dòng xả tối đa (Imax) : 50 kA
+ Dòng xả danh định cho lớp 2 (8/20) (In) : 20 kA
+ Dòng tổng (8/20 µs) L+N->PE (Itotal) : 50 kA
+ Mức điện áp bảo vệ (Up) : <1,3 kV
+ Dòng xả kiểm tra tại lớp 1 (10/350) N/PE (Iimp) : 20 kA
+ Điện áp quá mức tạm thời (TOV) L/N (UT) : 335 V/5 s
+ Điện áp quá mức tạm thời (TOV) N/PE (UT) : 1200 V/0,2 s
+ Thời gian đáp ứng của L/N (tA) : < 25 ns
+ Thời gian đáp ứng của N/PE (tA) : < 100 ns
+ Cầu chì bảo vệ tối đa : 160 A gL/gG
+ Khả năng chống ngắn mạch ( Ip) : 60 kArms
+ LPZ : 1-2
+ Vật liệu cấu thành : Polyamid PA6, UL94 V-0
+ Cấp bảo vệ : IP20
+ Dải nhiệt độ hoạt động (ϑ) : -40°C ... +80 °C
+ Mặt cắt ngang phần kết nối dây dẫn (at tightening moment of clamps 3 Nm) : 25 mm2 (solid),16 mm2 (wire)
+ Dạng lắp đặt : DIN rail 35 mm
+ Trạng thái báo lỗi (S) : green - ok / red - failure
+ Khả năng tín hiệu đóng ngắt (DS) (recommended cross-section of remote monitoring max.1 mm2) : AC: 250 V / 0,5 A, DC: 250 V / 0,1 A
+ Tuổi thọ : min. 100 000 h
+ Trọng lượng (m ):166 g
+ Số mã thiết bị : 27 015
Sản phẩm cùng loại
Thiết bị chống sét lan truyền Type I + II - ProSurge BSF100-3/320-63A-3PN-VTD-S
MSP : BSF100-3/320-63A-3PN-VTD-S